Clip Continuous Rec - JVC GY-HM600E Instructions Manual

1 Set [Rec Mode] to "Pre Rec".
(A P110 [ Rec Mode ] )
Set [Main Menu] B [System] B [Record
0
Set] B [Rec Mode] to "Pre Rec".
The display changes ("STBY" B "STBYP").
0
2 Press the [REC] button to start recording in
Pre Rec mode.
The display changes ("STBYP" B
0
"RRECP") and the card slot status indicator
lights up in red.
Press the [REC] button again to pause
0
recording. The display changes ("RRECP"
B "STBYP") and the card slot status
indicator lights up in green.
Caution :
When the interval between start and stop
0
recording is short, "STBYP" may not be
displayed immediately after recording is
complete.
"RRECP" B "STBYP" ("STBY" blinks in red)
B "STBYP" is displayed.
When the SD card becomes full during
0
recording, recording stops and "STOP" is
displayed.
Video and audio before the above mentioned
0
time may not be recorded after recording starts
in the following cases.
Immediately after power on
0
Immediately after recording stops
0
Immediately after switching from Media
0
mode to Camera mode
Immediately after setting [Rec Mode]
0
Immediately after the end of Clip Review
0
Immediately after changing file format
0
Immediately after changing video format
0

Clip Continuous Rec

In normal recording, when the recording stops,
0
the image, audio, and accompanying data from
the start till the end of the recording are recorded
as one "clip" on the SD card.
This mode allows you to consolidate several
0
rounds of "startstop recording" into one clip.
Example:
In normal recording, three clips are generated as
Recording 1, Recording 2, and Recording 3.
However, recording in this mode generates only
one clip.
76
Press [REC] Press [REC]
(Recording starts) (Recording resumes)
Press [REC]
(Recording pauses) (Recording pauses)
Recording 1 Recording 2
Completed Clip
(Recorded video and audio)
Recording 1 Recording 2
1 Set "Rec Mode" to "Clip Continuous".
(A P110 [ Rec Mode ] )
Set [Main Menu] B [System] B [Record
0
Set] B [Rec Mode] to "Clip Continuous".
The display changes ("STBY" B "STBYC").
0
2 Start recording. (Recording 1)
Press the [REC] button to start recording in
0
Clip Continuous mode.
The display changes ("STBYC" B
0
"RRECC") and the card slot status indicator
lights up in red.
3 Pause recording.
Press the [REC] button again to pause
0
recording. The display changes ("RRECC"
B "STBYC" (yellow text)).
The card slot status indicator remains lighted
0
in red.
Memo :
When the [CANCEL] button is pressed while the
0
camera recorder is paused (STBYC), the
display changes ("STBYC" (yellow text) B
"STBYC" (blinking yellow text) B "STBYC"
(white text)), and a "clip" is generated. The card
slot status indicator lights up in green.
4 Resume recording. (Recording 2)
Press the [REC] button again to resume
0
recording. The display changes ("STBYC"
(yellow text) B "RRECC").
The card slot status indicator remains lighted
0
in red.
Press [REC]
(Recording resumes)
Press [REC] Press and hold [REC]
(Recording stops)
Recording 3
Recording 3