Yamaha RX-V2065 Owner's Manual page 63

Setting a remote control ID
Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
"ID1" is set for both the main unit and remote control by
default. If you have changed the remote control ID, make
sure that you select the same ID for the main unit in the
the advanced setup menu.
y
• For details on how to set the remote control ID of the simplified remote
control, see page 8.
1
Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2
Press iON SCREEN.
3
Enter the desired remote control ID code.
To switch to ID1, press lNumeric keys to enter
"5019".
To switch to ID2, press lNumeric keys to enter
"5020".
Once the remote control code is registered,
nTRANSMIT blinks twice.
If it fails, nTRANSMIT blinks six times. Repeat
from step 1.
y
• If you initialize the settings of this unit, "REMOTE ID" (remote control
code of this unit) is set to "ID1".
Advanced setup
61
En