Panasonic AK-HC3500AES Operating Instructions Manual page 21

Component system configuration
Outline of peripheral components
p Camera Control Unit (CCU: AK-HCU355AE/ES)
This is the Studio Handy Camera's camera control unit.
It is connected to the Studio Handy Camera using an
optical fibre multi cable.
p Remote Operation Panel (ROP: AK-HRP935AE)
The ROP is connected to the CCU using the ROP cable,
and enables the camera, CCU and lens to be operated by
remote control.
p Master Setup Unit (MSU: AK-MSU935AE)
When a multiple number of cameras and CCUs are used,
the MSU can operate up to 12 units either separately or
simultaneously by remote control.
It can be operated together with the ROP.
p 2-type Electronic HD Viewfinder
(2˝ VF: AJ-HVF21KG)
This is the viewfinder for the Studio Handy Camera.
p 7-type LCD View Finder (7˝ LCD VF: AK-HVF70G)
This is the LCD viewfinder for the Studio Handy Camera.
It can be used at the same time as the 2-type viewfinder.
It can still be operated when the system is built up.
Component connections
Refer to pages 22 to 23 for the component connections.
After all the components have been connected (the monitor
system may be connected afterward), set the CCU's main
power switch to the ON position.
Then turn on the camera's power switch.
21