Answering Calls - Panasonic KX-TG1850ALT Operating Instructions Manual

TG1850AL(e).book Page 17 Monday, December 6, 2004 9:10 PM
R button (to use the recall feature)
{R} is used to access optional telephone
services. Contact your service provider for
details.
Note:
L If your unit is connected to a PBX (private
branch exchange), pressing {R} can allow
you to access certain features of your host
PBX such as transferring an extension
call. Consult your PBX dealer for details.
L You can change the recall time (page 29).
L Users in Australia can access Telstra's
"EASY CALL" service by having the recall
time set at 100 msec. (default setting, see
page 27), and then follow Telstra's "EASY
CALL" instructions to operate this service.
Pause button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
Example: If you have to dial {0} before
dialling outside numbers manually, you will
probably pause after dialling {0} until you
hear a dial tone.
1
Press {0}.
2
Press s (right soft key).
3
Dial the phone number, then press {C}
or {s}.
Note:
L Pressing s 1 time creates 1 pause.
Press s repeatedly to create longer
pauses. To change pause length, see
page 29.

Answering calls

1
Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer a call by pressing
any dial key from {0} to {9}, {*}, {#},
or {INT}. (Any key answer feature)
Making/Answering Calls
2
When finished talking, press {ih} or
place the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press {C}. To turn this feature on, see
page 25.
To adjust the ringer volume when an
outside call comes in
Press {e} or {v} when an outside call
comes in.
Note:
L The ringer volume cannot be adjusted if
the handset is on the base unit.
Other features
Handset locator
Using this feature, you can locate the
handset if it has been misplaced.
1
Press {x} on the base unit.
L The base unit will page the handset
for about 1 minute.
2
To stop paging, press {x} on the base
unit or press {ih} on the handset.
17