Using A Microphone Or Guitar - Panasonic SC-CMAX5 Operating Instructions Manual

Connecting to an additional
SC-CMAX5 unit
You can connect to play sound from this unit to an
additional SC-CMAX5 unit.
Additional SC-CMAX5
(rear)
Audio cable (not supplied)
1
Connect the additional SC-CMAX5 using an
audio cable (not supplied).
2
On the additional SC-CMAX5 unit:
Press [AUX] to select "AUX 1".
3
On this unit:
Start your desired playback.
≥ The sound effect will be controlled separately by each unit.
Make the same sound settings on the additional unit if
necessary.
Using a microphone or
guitar
Preparation
≥ Decrease the volume of the system to its
minimum before you connect or disconnect a
This unit (rear)
microphone or guitar.
e.g.
By the unit only
1
2
3
4
≥ If a strange noise (howling) is emitted, move the microphone/
guitar away from the speakers, or decrease the volume of
the microphone/guitar.
≥ Set the microphone/guitar volume to "MIN", and disconnect
the microphone/guitar after use.
≥ This system cannot record from microphone or guitar.
Audio cable
(not supplied)
Connect a microphone or guitar.
≥ Plug type: ‰ 6.3 mm monaural
≥ When connecting a guitar, ensure to connect it to
MIC 2/ jack.
(Only when MIC 2/
Push [B MIC C
input setting.
Each time you push the button, the button position will
switch between pushed-down and released positions.
≥ When a guitar is connected:
Ensure the button is at pushed-down position. (C
≥ When a microphone is connected:
Ensure the button is at released position. (B MIC)
Incorrect setting may cause the sound to be too loud or too soft.
Adjust the volume of the microphone or guitar.
For microphone 1: Turn [MIC1-VOL].
For microphone 2 or guitar: Turn [VOL-MIC2/
If you want to sing with the background music:
Play the music source and adjust the volume of
the system.
≥ To sing along with the Karaoke features, refer to
"Karaoke". (l 16)
This unit (rear)
Microphone or
guitar
(not supplied)
Microphone
(not supplied)
jack is connected)
] to select the correct
)
].
RQT0A52
15
15