Panasonic KX-TG1313EG Operating Instructions Manual page 9

TG1311_1312_1313EG(e).book Page 9 Tuesday, October 21, 2008 5:04 PM
Symbols used in these operating
instructions
Symbol Meaning
Press {j/OK}.
{j/OK}
Proceed to the next operation.
i
{v}/{e}: " " Press {v} or {e} to select the words in
quotations.
Example: {v}/{e}: "OFF"
Display language
1
{j/OK}
2
{v}/{e}: "SETTING HS" i {>}
3
{v}/{e}: "DISPLAY OPT" i {>}
4
{v}/{e}: "LANGUAGE" i {>}
5
{v}/{e}: Select your desired language. i {>} i {ih}
Note:
L If you select a language you cannot read: {ih} i {j/OK} i {v}
i {>} i {v} 3 times i {>} i {v} 2 times i {>} i
{v}/{e}: Select your desired language. i {>} i {ih}
Dialling mode
If you cannot make calls, change this setting according to your telephone
line service. The default setting is Tone.
"1" (Tone): For tone dial service.
"2" (Pulse): For rotary/pulse dial service.
1
{j/OK}
2
{v}/{e}: "SETTING BS" i {>} i {3}
3
Enter base unit PIN (default: "0000"). i {1}
L If you forget your PIN, see page 21.
4
Select the desired setting by pressing {1} for tone dialling mode or {2}
for pulse dialling mode.
5
{>} i {ih}
Date and time
1
{j/OK}
2
{v}/{e}: "SETTING BS" i {>} i {*}
3
Enter the current hour and minute (24-hour time entry).
L If you make a mistake, press {C}. Digits are cleared from the right.
4
{>}
L A beep is heard.
5
{>} i {*} 2 times
6
Enter the current date, month, and year.
L If you make a mistake, press {C}. Digits are cleared from the right.
7
{>} i {ih}
Preparation
9