How To Use The Wide Panel - Panasonic DMW-FL360 Operating Instructions Manual

How to use the Wide Panel

≥
Use the built-in wide panel for
flash photography when the focal
length of the lens is wider than
12 mm.
≥
Set [Wide panel switching] to [ON].
(P38)
1 Pull out the wide panel and
then push it down.
≥
[ ] appears on the display
panel.
2 Press the [ZOOM] button,
and select the lighting
angle.
A: Lighting angle
≥
ZOOM, 8 mm or 10 mm [ZOOM,
16 mm or 20 mm for a 135 camera
(35 mm film conversion)] can be
selected.
ZOOM
A
≥
When using the wide panel, the
guide number (GN) is reduced. This
means that the working range is
reduced when taking photos in the
[TTL AUTO], [AUTO] or [FP TTL
AUTO] mode and that the optimum
camera to subject distance is
reduced when taking photos in the
[MANUAL] or [FP MANUAL] range.
≥
After taking the photos, retract the
wide panel.
≥
Do not push the wide panel
upward. Otherwise it may be
damaged.
35
VQT1B11