Panasonic SC-PTX60 Operating Instructions Manual page 31

Disc operation
It takes time before play starts.
≥ Play may take time to begin when an MP3 track has still picture data.
Even after the track starts, the correct play time will not be displayed.
This is normal. [MP3]
≥ This is normal on DivX video. [DivX]
A menu screen appears during skip or search.
This is normal for Video CDs.
Playback control menu does not appear.
with playback control
[VCD]
Press [∫ STOP] twice and then press [1 PLAY].
Program and Random play do not work.
These functions do not work with some DVD-Videos.
Play does not start.
≥ This unit may not play WMA and MPEG4 that contains still picture data.
≥ If playing DivX VOD content, refer to the homepage where you
purchased the DivX VOD content. (Example: www.divx.com/vod) [DivX]
≥ If a disc contains CD-DA and other formats, proper playback may not be
possible.
No subtitles.
≥ Display the subtitles. ("SUBTITLE" in Menu 1) (
≥ Subtitles may not be displayed depending on the disc. [DivX]
Point B is automatically set.
The end of an item becomes point B when it is reached.
The Setup menu cannot be accessed.
≥ Select "DVD/CD" as the source.
≥ Cancel Program and Random play. (
Sound
Sound is distorted.
≥ Noise may occur when playing WMA.
≥ When using the HDMI output, audio may not be output from other
terminals.
Effects do not work.
Some audio effects do not work or have less effect with some discs.
Humming is heard during play.
An AC mains lead or fluorescent light is near the main unit. Keep other
appliances and cables away from the main unit.
No sound.
≥ There may be a slight pause in sound when you change the play speed.
≥ Audio may not be output due to how files were created. [DivX]
≥ Audio may not be heard when more than 4 devices are connected with
HDMI cables. Reduce the number of connected devices.
≥ When using the HDMI connection, ensure that "AUDIO OUT" in the
HDMI menu is set to "ON". (
≥ If the input source is bitstream, set the sound setting to PCM on the
external equipment.
No sound from the TV.
Confirm the audio connection. Press [EXT-IN] to select the corresponding
source. ( 8, 9, 12)
No surround sound.
Press [SURROUND] to select "A.SRND". (
[VCD]
[DVD-V]
18)
16)
25)
13)
Picture
The picture on the TV is not displayed correctly or
disappears.
≥ The unit and TV are using different video systems. Use a multi-system
or PAL TV.
≥ The system used on the disc does not match your TV.
– PAL discs cannot be correctly viewed on an NTSC TV.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV
("NTSC DISC OUT" in VIDEO menu). (
≥ Ensure that the unit is connected directly to the TV, and is not
connected through a VCR. (
≥ Mobile telephone chargers can cause some disturbance.
≥ If you are using an indoor TV antenna, change to an outdoor antenna.
≥ The TV antenna wire is too close to the unit. Move it away from the unit.
≥ Change "SOURCE SELECT" in Menu 2. [DivX] (
≥ Pictures may not be seen when more than 4 devices are connected with
HDMI cables. Reduce the number of connected devices.
≥ When using the HDMI AV OUT terminal, ensure that an incompatible
video output with the connected TV is not selected. Press and hold
[CANCEL] until the picture is displayed correctly. (The output will return
to "480p" or "576p".) ( 19)
≥ Video images converted to 1920k1080 resolution may look different
from the true native 1080p full-HD sources. This is not a malfunction of
the main unit.
[DivX]
Picture stops.
Picture may stop if the DivX files are greater than 2 GB.
Picture size does not fit the screen.
≥ Change "TV ASPECT" in the VIDEO menu. (
≥ Use the TV to change the aspect.
≥ Change the zoom setting. ("ZOOM" in Menu 2) (
Menu is not displayed correctly.
Restore the zoom ratio to "NORMAL". ("ZOOM" in Menu 2) (
Auto zoom function does not work well.
≥ Turn off TV's zoom function.
≥ Zoom function may not work well, especially in dark scenes and may
not work depending on the type of disc.
When playing PAL disc, picture distorted.
Set "TRANSFER MODE" in Menu 2 to "AUTO". (
After choosing "Home Cinema" in "Speaker control" with the
TV's remote control, the TV's input selection also changes.
Disconnect the HDMI cable from the TV and reconnect it to a different
HDMI terminal.
iPod operation
Cannot charge or operate.
≥ Check that the iPod is connected firmly. (
≥ The battery of the iPod is depleted. Charge the iPod, and then operate
again.
Cannot display iPod photos/videos on the TV.
≥ Ensure the video connection to the VIDEO OUT terminal on this unit.
( 8)
≥ Operate the iPod menu to make the appropriate photo/video output
settings for your TV. (Refer to operating instructions for your iPod.)
HDMI or progressive video
There is ghosting when HDMI or progressive output is on.
This problem is caused by the editing method or material used on DVD-
Video, but should be corrected if you use interlaced output. When using
the HDMI AV OUT terminal, set "VIDEO FORMAT" in Menu 4 to "480i" or
"576i". Or, disable the HDMI AV OUT connection and use other video
connections. ( 8, 19)
24)
8)
19)
24)
19)
19)
19)
22)
(Continued on next page)
31
31