Setting Date And Time - Panasonic SDR-S26 Basic Operating Instructions Manual

Preparation
3
Setup
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
¬ Rotate the mode dial to select
1
Select the menu. (l 19)
[BASIC] # [CLOCK SET] # [YES]
2
Select the date or time, then
adjust the desired value with the
joystick.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ The 24-hour system is used to display the time.
≥ [ ] appears on the right top of the screen
when [SET WORLD TIME] is set to [HOME],
while [ ] appears when it is set to
[DESTINATION].
3
Press the joystick to enter the
selection.
≥ The clock function starts at [00] seconds when
the joystick is pressed.
4
Press the MENU button to finish
the setting.
≥ Check the date and time displayed.
∫ Changing the date and time display mode
Select the menu. (l 19)
[SETUP] # [DATE/TIME] # desired display
style
[DATE] [D/T]
15.11.2009 15.11.2009 12:34
20
LSQT1505 (ENG)

Setting date and time

or .
∫ Changing the date format
Select the menu. (l 19)
[SETUP] # [DATE FORMAT] # desired
display style
≥ To set summer time, select summer time in
≥ The date and time function is driven by a built-
≥ If the time display is [- -], the built-in lithium
[OFF]
Display style
[Y/M/D]
[M/D/Y]
[D/M/Y]
[HOME] for [SET WORLD TIME] after setting
the clock.
in lithium battery.
battery needs to be charged. Use the following
steps to charge the battery, and then set the
date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or insert the battery to
the unit, and the built-in lithium battery will be
recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the mode
dial is set to OFF, the battery is still being
recharged.)
Screen display
2009.11.15
11.15.2009
15.11.2009