Answering Calls; Useful Features During A Call - Panasonic KX-PRD250EX1 Operating Instructions Manual

Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 32).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
0 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3 second pause is inserted each time MDN
(Pause) is pressed.

Answering calls

1
Lift the handset and press M
when the unit rings.
R To answer a mobile call, you can also
press M N.
2
When you finish talking, press M
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 40).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Using the Smart Function Key
When the indicator flashes rapidly, press
M N.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 18).
You can finish talking by pressing M
without lifting up the handset.
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
PRL250EX1(en)1006_ver011.pdf
Using the base unit
When a landline call is being received, the Z
indicator flashes rapidly. When a mobile call is
being received,
indicator flash rapidly.
1
2
3
Adjusting the base unit ringer volume
N
Press MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN
Adjusting the base unit speaker
volume
Press MjN or MkN repeatedly while talking.
N or MZN
Useful features during a
call
N or
Hold
1
2
3
N.
N
25
Making/Answering Calls
or indicator and Z
Press MZN when the unit rings.
Speak into the microphone.
When you finish talking, press MZN.
until the unit beeps.
Press M N during an outside call.
MbN: "Hold" a MOKN
To release hold on the mobile line:
Press M N.
R Another handset user can take the call:
*1
M N a MOKN
*1 The call is taken when:
– only 1 mobile phone is paired.
– a specific line is set to make
mobile calls (page 23).
R The base unit user can take the call by
pressing MZN.
To release hold on the landline:
Press M N.
R The base unit user can take the call by
pressing MZN.
2014/10/06 15:04:34
25