Table of Contents
Advertisement
for charging only; data is not exchanged with
the base unit.
Note:
R You may need to remove your smartphone
from its case in order to establish a secure
connection with the Lightning connector.
KX-PRD250 series: page 3
You can connect a USB cable (not supplied)
to the rear of the base unit and use it to
charge your smartphone. This connection is
for charging only; data is not exchanged with
the base unit.
n If your smartphone's USB port is located
at the centre of its bottom panel
You can also run a USB cable (not
supplied) through the cable slot (
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
PRL250EX1(en)1006_ver011.pdf
Note:
R Certain smartphones may not be able to be
Display icons/Indicators
Handset display items
Item
) and
15
Getting Started
place your smartphone on the base unit for
charging.
1
charged via USB.
Meaning
Range status: The more bars
visible, the closer the handset
is to the base unit.
Out of base unit range
Security for phone calls is set
to "Enhanced". (page 47)
Paging, intercom mode
Speakerphone is on.
(page 24)
The landline is in use.
R When flashing slowly: The
call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
2014/10/06
15:04:33
15
Advertisement
Table of Contents
