Before Operating the PS
Power On/Off
Power On
Press POWER for about 2 seconds.
• When the PS is turned on, it will be in standby mode. Standby mode is the state
of the PS when it is not performing any operations and is awaiting calls.
Display Icons
301:Paul
3.Jul 10:08
8
Power Off
Press POWER for about 2 seconds.
The display will go blank.
Within range of a Cell Station
Out of range, No registration
Intercom Indicator
Off-hook Status
Message Waiting
Phonebook Mode
Battery Strength
Hot Line ON
Ringer Volume OFF
Vibration ON
Meeting Mode
Call Forwarding
Do Not Disturb