Electrical Connection - Baumatic BTM25.5SS User Manual

E lectrical connection
o We recommend that the appliance is connected by a qualified
o WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance is supplied with a
o If in future you need to change the fuse in this plu
o The socket must still be
o
o As the colours of the wires in the appliance's mains lead may not
o When the connection is completed, no stray strands or cut wire
Downloaded From Microwave-Manual.com Manuals
o Before connecting the appliance, make sure that the
supply
corresponds with your mains supply voltage.
electrician, who is a member of the N.I.C.
comply with the I.E.E. and local regulations.
connected to an earthed socket.
amp ASTA approved (BS 1362) fuse must be used.
located on the worktop.
T he wiring in the mains lead is coloured as follows:
Brown
Blue
Green and yellow
correspond with the coloured markings ident
in your spur box, please proceed as follows:
The brown wire must b
(l ive), or coloured red.
The blue wire must be conn
(n eutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked "E" (e arth), or by the earth symbol, or coloured green
a nd yellow.
should be pre sent. The cord clamp must be secured over the
outer sheath.
voltage marked
moulded plug, which must be
accessible even when your microwave is
Live
Neutra l
Earth
e connected to the terminal marked "L"
ected to the terminal marked "N"
30
on the rating
E.I.C. and who will
g, then a 13
ifying the terminals
plate