Electrical Connection - Baumatic BTM25.5SS User Manual

Electrical connection

o Before connecting the appliance, make sure th
o We recommend that the appliance is conne
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
o WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance is supplied with a moulded plug, which must be
connected to an earthed socket.
If in future you need to change the fuse in this plug, then a 13
o
amp ASTA approved (BS 1362) fuse must be used.
o The socket must still be accessible even when your microwave is
located on the worktop.
The wiring in the mains lead is colo
o
Brown
Blue
Green and yellow
o As the colours of the wires in the appliance's
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
T he brown wire must be connected to the terminal marked "L"
(live), or coloured red.
T he blue wire must be connected to the terminal marked "N"
(neutral), or coloured black.
The green an
m arked "E" (earth), or by the earth symbol, or coloured green
and yellow.
o When the conn
should be present. The cord clamp must be secured over the
outer sheath.
supply voltage
corresponds with your mains supply voltage.
Live
Neutral
Earth
d yellow wire must be connected to the terminal
ection is completed, no stray strands or cut wire
30
marked on the
cted by a qualified
ured as follows:
mains lead may not
at the
rating plate