Preparation for Wall-hanging
Before mounting the display on the wall, you must remove the pedestal from the display.
Follow the steps below:
1
Disconnect all the cables from the display.
2
Remove the pedestal.
Remove four screws
A
Pull out the pedestal
B
WARNING
•
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount will void your unit's warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
•
Do not mount this LCD display directly below ceiling lights (such as spotlights, floodlights, or halogen lights) which
typically give off high heat. Doing so may warp or damage plastic cabinet parts.
Connections
SLOT1
Foam mat or thick
soft cloth
SLOT2
Optional Terminal
Board Insert Slot
(covered)
SLOT3
PC
IN
From EXTERNAL
monitor terminal on
Computer (see page 10)
Accessories
A
B
A
AUDIO
SERIAL
From SERIAL
Terminal on Computer
(see page 11)
9