Panasonic CQ-VD6505W Operating Instructions Manual page 31

MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡The ID code is not deleted by executing memory clear.
: clears the memory to default settings
YES
NO : no memory clear.
The display returns to the previous one.
OK : proceed.
: no memory clear.
CANCEL
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OTHER
Other settings
BEEP
(Beep setting)
ON
: operation sound (beep) ON
OFF
: operation sound (beep) OFF
appears when
REALLY?
is selected.
YES
default:
ON
(Setting ACC selection ON and
ACC SELECT
OFF)
ON
: sets to ON if your car has ACC position.
OFF
: sets to OFF if your car has no ACC posi-
tion.
Note:
¡For an ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
OFF
main unit through the remote control.
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
OFF
ACC
IGN
REMOTE CONTROL
(Remote control setting)
FRONT
: main unit-specific remote control
REAR
: rear monitor (option)-specific remote
control
SECURITY LED
(Security LED setting)
OFF
: LED indicator not blinking with ignition
key being at out-of-ACC
ON
: LED indicator blinking with ignition key
being at out-of-ACC
MENU DISPLAY
(Language setting)
ENGLISH
: displays the menu in English.
CHINESE
: displays the menu in Chinese.
30
default:
ON
default:
FRONT
default:
ON
default:
ENGLISH
31
CQ-VD6505W