Configuration Of The Teleservice Access - Siemens S7-1200 Operating Instructions Manual

Address and authentication information for communication with TCSB
The following information is required for the STEP 7 configuration of the CP for
communication with TCSB:
● Parameters in the "Partner stations" parameter group
– Partner IP address
– Partner port (port number of the listener port of TCSB)
● Parameters in the "CP identification" parameter group ("Security" parameter group)
– Project number
– Station number
– Password (for authentication)
4.4

Configuration of the TeleService access

Configuration for using TeleService
To meet the requirements for using the TeleService functions for the CP, you need to make
the necessary settings at the following points in STEP 7.
"Communication types" parameter group of the CP
Select the following options:
● Enable telecontrol communication
● Activate online functions
"Mobile wireless communications settings" of the CP
You configure the following information in the parameter group "Mobile wireless
communications settings" of the CP:
● Address of the TeleService server
IP address or name of the telecontrol server that can be resolved by DNS or of the
TeleService gateway
● Port
Port number of the telecontrol server or the TeleService gateway
CP 1243-7 LTE
Operating Instructions, 01/2015, C79000-G8976-C381-01
Fixed IP address of the DSL router via which the telecontrol server is connected to the
Internet.
Configuration and operation
4.4 Configuration of the TeleService access
45