Panasonic X70 Operating Instructions Manual page 80

Configuring MMS
Note: Your MMS settings may have been pre-configured by your service provider.
MMS may not work if you change these settings.
You must configure your MMS before you can send or receive MMS messages. You can
create up to three server profiles on the phone.
Server
Auto
Profile
Name
For Circuit Switch, select Set, then select Edit and set:
Digital Dial number
Analogue Dial number
Circuit Type. Select from Digital and Analogue.
User ID
User Password
For GPRS, select Set, then select Edit and set:
Access Point Name
User ID
User Password
Authentication. Select from Normal, Encrypted and None.
Note: Once you have set up a server you need to select the new server and select Set to
activate the new setting.
Server List
<1> to <3>
Edit
Server Gateway
URL IP
Circuit
Switch
Messaging
Bearer
Type
GPRS
81