Panasonic P341i Operating Instructions Manual page 113

Connect
On your computer, run your Bluetooth
Select Find Bluetooth Devices.
Your computer should Discover your phone.
On your computer select Pair, then enter the Passkey (any number from 1 to 16
digits).
On your phone enter the same Passkey then select Ok.
Installing the Data Connection Assistant software
The Data Connection Assistant software is supplied with your phone on the CD-ROM,
or it can be downloaded from www.panasonicmobile.com.
Follow the instructions provided to install the Data Connection Assistant.
Note: Select Other/Skip modem install for operation with Bluetooth
Once the Data Connection Assistant is installed you need to set up a connection to your
®
Bluetooth modem:
Select Start > Programs > Panasonic Data Connection Assistant > Data Connections.
If you are using a circuit switched connection:
Select Make New Connection.
Select Modem - (Panasonic P341i or Bluetooth
window).
Enter the phone number for your Internet Service Provider (ISP).
If you are using a GPRS connection:
Select Make New GPRS Connection (GPRS).
Select Modem - (Panasonic P341i or Bluetooth
window).
Enter the Access Point Name (APN) supplied by your GPRS network operator.
Note: With some Bluetooth
COM port for the Data Connection Assistant. To do this on your computer select
Start > Settings > Control Panel > Phone and modem options > Add > COMn,
where n is the Bluetooth
114
®
application.
®
USB adaptors you may need to add a modem on the correct
®
COM port number.
®
.
®
COM port from the Select a Device
®
COM port from the Select a Device