Table of Contents
Advertisement
4 Instructions For Use
Remove the cable tie and unravel the cordset before operation.
The fan and motor assembly are attached to a 4-position ratchet.
Tilt up or down until the assembly clicks into the desired position
Press button 1 for a low speed , 2 for a medium speed and 3 for a high speed.
Press 0 to switch the Fan off.
To blow air in one direction and stop oscillation, allow the Fan head to move into the
desired position and then pull the clutch knob up.
Press the clutch knob down to return to a normal oscillating function.
5 Care and Cleaning
•
Turn off and unplug the unit prior to cleaning.
•
To clean the blade and grille assembly, first remove the safety grille, unscrew the
locknut and remove the blade from the Fan motor. Wipe them clean with a slightly
damp sponge.
•
Clean the motor housing and body assembly with a clean, damp cloth and wipe
dry.
•
Never spray with liquids or submerge the Fan in water or any other liquid.
•
Do not use flammable liquids, chemicals, abrasive creams, steel wool or scouring
pads for cleaning.
6 Storage
Switch off and unplug the fan.
Coil the cable loosely. Do not kink or pull the cable tight.
Store your fan in a cool, dry location
Page 8 of 9
Advertisement
Table of Contents
