Setting The Water Hardness Level; Setting The Correct Boiling Point For Water - Miele TX3587 Operating And Installation Instructions

Using for the first time
Setting the water hardness
level
The water hardness level of the steam
oven is set to Hard
trouble-free operation of the steam
oven, and to ensure that it is descaled
at the appropriate time, it is important
to set the water hardness level for your
area. The harder the water, the more
often the steam oven must be descaled.
 Check the hardness of your local
water supply and adjust the water
hardness as necessary (see "Settings
- Water hardness").
26
at the factory. For
Setting the correct boiling
point for water
Before cooking with the steam oven for
the first time, it must be set to the
correct boiling point for water in your
area. This is determined by the altitude
at which you live. This procedure also
flushes out the water pipework.
This procedure must be carried out
to ensure efficient functioning of your
appliance.
 Run the Steam cooking 
programme at 100 °C for 15 minutes.
Proceed as described in "Operation".
Setting the correct boiling point for
water following a house move
If you move house, the appliance will
need to be reset for the new altitude if
this differs from the old one by 300 m or
more. To do this, descale the appliance
(see "Cleaning and care - Descaling").