Telephone Or Fax Connection - Technicolor TC7200.20 User Manual

Telephone or Fax Connection

When properly connected, most telephony devices can be used with the Wireless Voice Gateway just as with
a conventional telephone service. To make a normal telephone call, pick up the handset; listen for a dial tone,
then dial the desired number. For services such as call waiting, use the hook switch (or FLASH button) to
change calls. The following procedures describe some of the possible connection schemes for using
telephony devices with the Wireless Voice Gateway.
1. Connect a standard phone line cord directly from the phone (fax machine, answering machine, caller ID
box, etc.) to one of the LINE jacks on the Wireless Voice Gateway.
2. If there is a phone line in your home which is NOT connected to another telephone service provider,
connect a standard phone line cord from a jack on this line to one of the LINE jacks of the Wireless
Voice Gateway. Connect a standard phone line cord directly from the phone (fax machine, answering
machine, caller ID box, etc.) to one of the other jacks in the house that uses that line.
3. If you have a multi-line telephone, connect a standard phone line cord (not an RJ-14 type line cord) from
the phone to the LINE jacks on the Wireless Voice Gateway. (Other phones can be added to each line by
using standard phone line splitters.)
Page 18 / 85