Charging The Battery - Panasonic EB-X800 Operating Instructions Manual

Panasonic mobile phone operating instructions
Table of Contents

Advertisement

Getting Started

Charging the battery

Your phone can be charged either when it is switched on or off. You
can use your phone switched on even while charging.
Ensure that the battery is attached in the phone before charging.
1. Open the connector cover at the left
side of the phone as you turn over
and upside down the phone.
Connect the charger to the Charging
Connector, then connect the charger
to the mains power supply.
2. When charging is complete,
disconnect the charger from the outlet
before removing the plug from the
phone. You should press and hold the
release buttons on both side of the
connector end and pull gently to
disconnect the charger from the
phone.
Note: DO NOT force the connector as this may damage the phone and/or
the charger.
If the battery has been deeply discharged, it may take several minutes
before the Battery charge level indicator is displayed.
Battery charge level indicator
While charging
18
Scrolling
Charging complete
Not scrolling
If the phone is switched on, "Battery
full" message appears.

Advertisement

Table of Contents
loading

This manual is also suitable for:

X800

Table of Contents