The Function Number Display Indicates Alarm After The Scanner Is Turned On - Fujitsu fi-6130 Cleaning And Maintenance

fi-6130 / fi-6230 Image Scanner Operator's Guide
6.3 Remedying Typical Troubles
Symptom: The Function Number Display indicates alarm (with [E] or other alphabetical letter
plus a number) after the scanner is turned ON.
Back
Did you unlock the transport lock of the
Flatbed? (fi-6230 only)
Does the Function Number Display indicate
any alarm after turning ON the scanner again?
If you cannot solve the problem after taking
measures, check the items in Section
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
YES
YES
"6.4
All Rights Reserved. Copyright 2007 © PFU LIMITED
Turn OFF the scanner and unlock the transport
lock, then turn ON the scanner again.
(Refer to "2.1 Installing the Scanner in "fi-
NO
6130/fi-6230 Getting Started.")
The scanner operation is normal.
NO
TROUBLESHOOTING
CONTENTS MAP
TOP