TP-Link TOUCH P5 User Manual page 92

Chapter 4
• IP Address Pool: The start and end addresses must be on the same subnet with
LAN IP. Your Touch P5 will assign addresses within this specified range to its
clients. It is from 192.168.0.100 to 192.168.0.199 by default.
• Address Lease
current dynamic IP address assigned by your Touch P5. After the dynamic IP
address expires, the client will be automatically assigned a new dynamic IP
address.
• Default Gateway
• Primary/Secondary DNS
ISP.
If you select Off, please make sure the DHCP server of your host network is on.
Otherwise, you have to configure the IP address for each client manually.
3 ) Tap Save.
¾ To view the client information:
1 ) Select DHCP Client
2 ) You can view the information of connected clients.
¾ To reserve an IP address for a specified client device:
1 ) Select Address Reservation
for your device.
Time: The amount of time in which a DHCP client can lease its
(Optional): Enter the LAN IP address of your Touch P5.
(Optional): Enter this parameters as provided by your
List.
and tap
Configure Touch P5 as an Access Point
Add to add an address reservation entry
87