Chapter 4
4. 8.
LAN
By default, your Touch P5 is set to obtain an IP address automatically from the host
network. The LAN app allows you to use a specific IP address appropriate to your
network demand.
Note: We do
NOT
recommend you change the IP address unless you are quite sure about the IP setting for special
network demand. Random changes may lead to Internet disconnection.
1. On the menu screen, tap the
2. Tap
Type
to select
3. Tap
IP Address
to enter an IP address in dotted decimal notation. It should be in the
same subnet as the host network.
4. Tap
Subnet Mask
the network portion and host portion of the IP address.
5. Tap
Default Gateway
in the same subnet as the IP address.
6. Tap Save.
LAN
icon to start it.
Use the following IP address
to enter the subnet mask in dotted decimal notation. It determines
to enter the gateway in dotted decimal notation . It should be
Configure Touch P5 as an Access Point
and tap Done.
85