GE JGRP20 Installation Instruction page 7

Installation Instructions
SECURE THE OVEN
IMPORTANT: Remove
all packing material and literature
from the oven before connecting
any electrical supplies,
[]
@
[]
Using a 1/8" drill bit, drill holes through the
side trim and into the cabinet front.
With the screws provided, secure the oven
to the wall.
If the cabinet cutout is 38" high, use the
short trim and attach to the bottom of the
front frame, with screws provided.
(If the cutout is higher than 38", use the taller trim.)
[_ RECHECK STEPS
Double check to make sure everything in this
guide has been completed. Rechecking steps will
ensure safe use of the oven.
WARNING:
The trim permits air
entry into the cabinet below the unit and
must not be blocked.
7