GE JGRP20 Installation Instruction page 10

Installation Instructions
MAKE THE L.P. GAS CONVERSION
(CONT.)
ADJUST AIR SHUTTER (CONT.)
BAKE BURNER
Air Shutter
Orifice
Fitting
Cover
Air Shutter S
Screw
Fig. 19
_] Use a screwdriver to loosen the air shutter
screw.
1. If the flames were yellow, open the air
shutter more than the original setting.
2. If the flames blew away or fluttered from
the burner, close the air shutter more than
the original setting.
_'] Make the adjustment.
_'] Retighten the air shutter screw.
[_] Close the oven door and recheck the flame.
_-_ When all adjustments are made and the
results are satisfactory:
1. Replace the orifice fitting cover.
2. Replace the oven baffle (flame spreader).
3. Replace the oven bottom.
ADJUST AIR SHUTTER (CONT.)
BROIL BURNER
_] The broil burner is located and accessible
in the top rear of the oven.
[_] Use a screwdriver to loosen the air shutter
adjustment screw.
1. If the flames were yellow, open the air
shutter more than the original setting.
2. If the flames blew away or fluttered from
the burner, close the air shutter more than
the original.
_'] Make the adjustment.
[_] Retighten the air shutter screw.
[_] Close the oven door and recheck the flame.
j
'Air Shutter Screw
Fig. 20
SPECIAL NOTE: To convert the oven back to
natural gas, reverse the instructions given in
making L.P. Adjustments.
-& WARNING:
Once the conversion is
complete, locate the L.P. Conversion Sticker
under the storage drawer on the main
bottom. When the Conversion checks OK,
fill out the L.P. sticker and include your
name, organization and date conversion
was made. Apply the sticker to the front
frame opposite the name and number plate
behind the storage drawer to alert others
in the future that this appliance has been
converted to L.P. If converting back to
natural gas from L.P., please remove the
sticker so others know the appliance is
set to use natural gas.
10