4.3
Operating area overview
When working with the CNC, you need to set up the machine and the tools, etc. as follows:
● Create the tools and cutting edges.
● Enter/modify the tool and work offsets.
● Enter the setting data.
Softkey functions
Pressing this key on the PPU allows you to open the following window:
①
Displays and modifies the tool offsets
②
Displays and modifies the tool wear data
③
Displays and modifies the work offsets
④
Displays and modifies the R variables
⑤
Configures and displays lists of setting data
⑥
Displays the defined user data
⑦
Measures the tool manually
⑧
Creates a new tool
For more information, see Section "Creating a new tool (Page 18)".
⑨
Opens a lower-level menu for cutting edge settings
For more information, see Section "Creating a new cutting edge (Page 194)".
⑩
Removes the currently selected tool from the tool list
⑪
Searches for your desired tool with the tool number
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
5.
Press this key or move the cursor to activate the compensation.
29