Tapping With Compensating Chuck - Cycle840 - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

9.4.7

Tapping with compensating chuck - CYCLE840

Programming
CYCLE840 (RTP, RFP, SDIS, DP, DPR, DTB, SDR, SDAC, ENC, MPIT, PIT, AXN)
Parameters
Parameter Data type
RTP REAL
RFP REAL
SDIS REAL
DP REAL
DPR REAL
DTB REAL
SDR INT
SDAC INT
ENC INT
MPIT REAL
PST REAL
AXN INT
The definition of the 1st, 2nd, and 3rd axes depends upon the current plane selected.
1)
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA2, 06/2015
5. Confirm your settings with this softkey. The cycle is then automatically transferred to the
program editor as a separate block.
Description
Retraction plane (absolute)
Reference plane (absolute)
Safety clearance (enter without sign)
Final drilling depth (absolute)
Final drilling depth relative to the reference plane (enter without sign)
Dwell time at final drilling depth (chip breakage)
Direction of rotation for retraction
Values: 0 (automatic direction reversal), 3 or 4 (for M3 or M4)
Direction of rotation after end of cycle
Values: 3, 4 or 5 (for M3, M4 or M5)
Tapping with/without encoder
Values: 0 = with encoder, 1 = without encoder
Thread lead as a thread size (signed):
Range of values: 0 (for M0) to 48 (for M48)
Thread lead as a value (signed)
Range of values: 0.001 ... 2000.000 mm
Tool axis
Values
1: 1st axis of the current plane
2: 2nd axis of the current plane
3: 3rd axis of the current plane
:
1)
137