Cds - Panasonic SC-PM19 Operating Instructions Manual

Micro system with built-in 5 cd changer
Hide thumbs Also See for SC-PM19:
Table of Contents

Advertisement

STOP
,
DEMO
4
4
/REW/
,
¢
3
/FF/
(CD 1) ~
(CD 5)
1
0
OPEN/
CLOSE
2
6
CD
3
VOLUME
DOWN
A
a
b
c
2
1
3
UP

CDs

This unit can play CD-DA (digital audio) format audio CD-R
and CD-RW that have been finalized (a process performed after
recording that enables this unit to play audio CD-R and CD-
RW).
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you can
select and listen to the CD in a particular tray. See the section
on All-Disc play (\ page 13) for information on how to listen to
all the CDs one after another.
Listening to CD on a single tray
1
Press [0 OPEN/CLOSE] to insert the CD on the
disc tray. Press again to close.
2
Press [CD 3/8] to start play from the first track.
The player stops after playing the last track.
3
Adjust the volume.
To
Action
Press [STOP 7 ,–DEMO].
stop the disc
Press [CD 3/8]. Press again to resume
pause play
play.
skip tracks
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢].
search through
Press and hold [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/
¢] during play or pause.
tracks
view CD indicator
The CD indicator on the display lights
whenever the tray is in the playing
position.
start one touch play
If the unit is in standby mode and a CD
is loaded, press [CD 3/8] or [CD 1] ~
[CD 5]. The unit will come on
automatically and play will start.
A CD selection and care
a
Only play CDs with COMPACT disc DIGITAL AUDIO trademark.
(see
)
Do not;
• Use irregularly shaped CDs. (
• Attach extra labels and stickers.
• Use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. (
• Attach scratch-proof covers or any other kind of accessory.
• Write anything on the CD.
• Clean CDs with liquids. (Wipe with a soft, dry cloth.)
• Use CDs printed with label printer available on the market.
To prevent damage
Always observe the following points.
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or when
loaded. Always unload all CDs before moving the system.
• Do not put anything except a CD in the tray.
• Do not use cleaning CDs or CDs which are badly warped or
cracked.
• Do not disconnect the AC power cord from the household
AC outlet during CD changing operation.
b
)
c
)
11
RQT7364

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents