Set-Up - Panasonic SC-AK403 Operating Instructions Manual

Set-up

Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
4
AC power supply cord
Note
The included AC power supply cord
is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit's
memory, except for time, remains
intact for up to a week after the AC
power supply cord is disconnected.
3
Speaker cords
SC-AK610 SC-AK510
3
Black
SC-AK410 SC-AK403
Blue
Black
Gray
3
2
1
Gray (+)
2
AM loop antenna
Stand the antenna up
on its base.
Connect the left (L) side
Blue
in the same way.
Gray Red
Red (+)
1
L
R Blue (+)
Gray
(+)
Black (–)
Connect the left (L) side
in the same way.
Red
Red (+)
Black (–)
Blue (–)
The illustration shows SC-AK510.
1
SC-AK610 only
S U B –
E R
W O O F
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
Caution
•
Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience
performance.
•
Do not attach these speakers to walls or
ceilings.
FM indoor antenna
Adhesive tape
Affix where
reception is best.
Subwoofer
(SB-WAK610)
a sudden change in
5
RQT6707