Specifying The Lamp Mode; Resetting Image Adjustment Settings - Canon WUX6000 User Manual

Specifying the Lamp
Mode
> [Image adjustment] >
HDMI
Digital PC
Reducing the lamp brightness
reduces power consumption and
cooling fan noise.
Full
power
Power
saver
Press the OK button to accept your
setting and then press the MENU button.
• The factory default is [Full power].
• The adjustment you have made is stored as
adjusted values for the input signals and
image mode of the current projection.
Note Regarding [Full power]
• The lamp mode will automatically
switch from [Full power] to [Power
saver] when the room temperature
exceeds approximately 35°C (95°F).
Similarly, the lamp mode will
automatically switch from [Power
saver] to [Full power] when the room
temperature falls below
approximately 32°C (90°F).
However, even if the lamp mode
switches to [Power saver] in this
case, it will still be displayed as [Full
power] in the menu.
• There may be some inconsistency in
the measurement of room
temperature.
Downloaded From projector-manual.com Canon Manuals
Adjusting Image Quality (Image Adjustment)
[Lamp mode]
Component
Analog PC
Projects images at full
brightness.
Reduces lamp brightness to
save energy.
Resetting Image
Adjustment Settings
> [Image adjustment] >
LAN HDMI
USB Digital PC
You can reset the current image
adjustment settings to the default
settings. If reset is performed when
user setting 1–5 is selected for
[Image mode], the settings are
returned to the settings that were
saved in [User 1–5].
OK Resets the image adjustment
settings.
Cancel Cancels resetting of the image
adjustment settings.
• Only the setting for the combination of input
signal and image mode for the current
projection is reset.
95
[Reset]
Component LAN
Analog PC USB