Checking The Printing Alignment - Brother DCP-310CN User Manual

Checking the printing alignment

You should rarely need to adjust the printing alignment however, if
after transporting the machine your printed text becomes blurred or
images become faded then adjustment may need to be made.
1
Ink Management
Press
2
Press
Set
Press
3
Press
Set
Press
4
Mono Start
Press
The DCP begins printing the Alignment Check Sheet.
The LCD shows:
5
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely matches number 0. If the
number 5 sample of both the 600 dpi and 1200 dpi are the best
matches, press
Step 8.
—OR—
If another test print number is a better match for either 600 dpi
or 1200 dpi, press
6
For 600 dpi, press
select the number of the test print
that most closely matches the
number 0 sample (1-8).
Set
Press
7
For 1200 dpi, press
select the number of the test print
that most closely matches the
number 0 sample (1-8).
Set
Press
8
Stop/Exit
Press
Downloaded from ManualsPrinter.com Manuals
5 - 13 TROUBLESHOOTING AND ROUTINE MAINTENANCE
or to select Test Print .
.
or to select Alignment .
.
Colour Start
or
( Yes ) to finish Alignment Check and go to
( No ) to select it.
or
.
or
.
.
.
.
Is Alignment OK?
▲
to
600dpi Adjust
Select Best #5
to
1200dpi Adjust
Select Best #5
▼
Yes No