Edimax IC-3010 Quick Instillation Manual page 25

Reset to
Default
LED Light
OFF
After all settings are completed, click 'OK' to save settings, or click 'Cancel' to
abort and discard changes.
Clear all settings in the camera. Please think again
before you do this, and then click this button to
reset all settings.
NOTE: IP address will be reset to default value
'192.168.2.3' also. You'll need to change the IP
address setting of your computer if the IP address
of your computer does not begin with '192.168.2',
and subnet mask is not '255.255.255.0', or you'll
not be able to connect to this IP camera again.
Switch the LED light of this IP camera off, so 'LAN'
and 'WLAN' LED on the IP camera will stop
working, in case you don't want other people know
the camera is transferring data.
You can click this button again to switch LED lights
on again.
24