Receiving A Call; Adjust Volume - Panasonic Strada CN-NVD905U Upgrade Manual

Receiving a call

1 When a call is received, the
Bluetooth hands free screen is
displayed.

The telephone number of the calling party is
displayed.
2 Press [Hang-on] on the Bluetooth
hands-free kit to answer the phone.
 Speak towards the microphone of the Bluetooth
hands-free kit.
Note:

Reception of a call when power is off does not turn on
the power of this unit.
 "CONNECT" is displayed when information of the
calling party cannot be acquired.
Calling back
Calls can only be placed to the last number displayed on
Receiving a call ( above).
1 Press [Hang-on] on the hands-free kit.

The Bluetooth hands free screen is displayed.
2 Check the number, then press
[Hang-on] on the Bluetooth
hands-free kit again.
 Once the call is connected, speak towards the
microphone of the Bluetooth hands-free kit.
Hang up
Press [Hang-up] on the Bluetooth
hands-free kit while talking.

The call is ended and the screen returns to the
original display.

Adjust volume

It can adjust the hands-free ring and talk volume when a
call is received. (The Bluetooth hands free screen is only
displayed.)
Select the volume.
Minimum Middle
Note:
 The speaker that outputs the hands-free talk can be
set. ( Operating Instructions)
Set the ring tone
If the cellular phone has a "no in-band ringing"
specifi cation, it can be set to ring or not ring when a call
is received.
Select [On] or [Off] from Ringing.
 [On]: Rings.
[Off]: Does not ring.
Note:
 If the cellular phone does not have the no in-band
ringing specifi cation, it is not possible to set to ring or
not ring. (Touch keys are not displayed either.)
Maximum
17
17