JVC UX-E8DAB Instructions Manual page 9

For better FM reception
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna
using a 75 Ω wire with a coaxial type connector (IEC or DIN45325).
FM antenna (supplied)
Extend it to obtain the best
reception.
For better DAB reception
Disconnect the supplied DAB antenna, and connect an active
antenna.
(See "Improving the DAB Reception" on page 13.)
Attaching the Core Filter
Attach the provided core filter to the USB cable (not supplied) to
reduce interference.
1
Stopper
USB cable
2
To the System
3
NOTES
• Do not damage the USB cable by applying excessive force when
winding.
• Use a USB 2.0 cable of less than 1 m in length.
Outdoor FM antenna
(not supplied)
Active antenna
(not supplied)
Release the stopper of
the core filter.
Run the USB cable
through the core filter,
leaving approx. 2 cm
between the unit-side
end of the USB cable
and the core filter.
Firmly wind the cable
2 cm
twice inside the
cutout of the core
filter.
Close the core filter
until you hear a
clicking sound.
4