Remote Control - Panasonic CQ-VA707N Operating Instructions Manual

I VTR, AV, CAMERA (Video, Video Camera, Rear View Camera)
Problem
No image from VTR or
video camera
No image from rear-view
camera
Colors are not correctly
reproduced.
Rough screen
I Radio
Problem
Much noise in FM stereo
and monaural broadcasts
Presettings lost from
memory
Switching the band mode
can not be performed.
I Remote Control
Problem
No operation by pressing
buttons
Possible Cause
VTR or video camera is not
correctly connected. Correct
mode is not selected.
Rear-view camera is not
correctly connected.
Camera input is not set cor-
rectly.
Display brightness and col-
ors are not correctly adjust-
ed.
Setting PAL/NTSC is not
correct.
Possible Cause
Station is too far or signals
are too weak.
Bad power battery line con-
nection.
Fuse for battery power
cables is blown.
PTY is activated.
Possible Cause
Battery inserted in wrong
direction.
Battery has run down.
Remote control not in cor-
rect direction.
Probable Solution
Connect VTR or video camera correctly, and
change the mode to correspond to the device
connected.
Connect rear-view camera correctly.
Set camera input correctly.
Adjust display brightness and colors.
Set PAL/NTSC correctly.
Probable Solution
Tune in to a station emitting strong signals.
Connect battery cables to terminals that are
always live.
Replace it with one of the specified rating.
Inactivate PTY and switch the band mode.
Probable Solution
Insert a battery correctly.
Replace battery.
Direct the remote control at the remote control
sensor on the display unit.
CQ-VA707N
E
N
G
L
I
S
H
62
65