Table of Contents
Advertisement
Installation
E
Preparation
N
G
L
I
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
S
H
hands and fingers.
¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
47
¡Before installation, check the radio operation with
antenna and speakers.
¡Disconnect the cable from the negative (–) battery
terminal (see caution below).
¡The unit should be installed in a horizontal posi-
tion with the front end up at a convenient angle,
but not more than 30°.
Caution: Do not disconnect the battery terminals of a car with trip or navigational computer since all
user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent
shorts.
Dashboard Installation
Installation Opening
The unit can be installed in any dashboard having an opening as shown at
right. The dashboard should be 4.5 mm - 6 mm thick in order to be able to
support the unit.
❏ Transportation bracket removal
Be sure to remove the transportation brackets before use (installation).
Use screws (5 mmφ x 6 mm) with washers for installation.
Be careful not to lose these screws.
Binding-Head
Screws
(5 mmφ x 6 mm)
50
Display Unit
Transportation
Bracket
CQ-VA707N
30° or less
Binding-Head
Screws
(5 mmφ x 6 mm)
Transportation
Bracket
53 mm
182 mm
Hide quick links:
Advertisement
Table of Contents
