Specifications - Panasonic CQ-VX2200W Operating Instructions Manual

Specifications

General
Power Supply
Current Consumption
Rated Output
Maximum Power Output
Suitable Speaker Impedance
Audio Input Impedance
Audio Input Voltage
Pre-out Output Voltage
Pre-out Output Impedance
Dimensions (W x H x D)
Weight
DSP
Number of Channels
Space mode
Equalizer Center Frequency
Variable Range of Equalizer
FM Stereo Radio
Frequency Range
Usable Sensitivity
Total harmonic distortion (mono)
Weighted S/N ratio (mono)
Frequency Response
Stereo Separation
Image response ratio
AM Radio
Frequency Range
Usable Sensitivity
Image response ratio
CD Player
Channel
Quantization
Frequency Response
Dynamic range
Wow and Flutter
Cassette Tape Player
Reproduction system
Tape Speed
Fast Forward Time
Rewind Time
Wow and Flutter
Signal/Noise Ratio
Frequency Response
Note : Specifications and the design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol B are trademarks of Dolby Laboratories Licensing Corporation.
: 12 V DC (11 V - 16 V), test voltage 14.4 V, negative ground
: Less than 8.5 A (CD play mode)
: 16 W x 4 ch (1 kHz, 1%, 4 Ω)
: 41 W x 4 ch
: 4 Ω
: 10 kΩ (AUX IN)
: 2 V (AUX IN)
: 2 V
: 600 Ω
: 178 x 100 x 160 mm
: 2.4 kg
: 2 input channels, 4 output channels
: 7 mode
: 80, 160, 320, 640, 1.6 k, 4 k, 10 k (Hz)
: –12 to +12 dB (13 steps)
: 87.5 - 108 MHz
: 12 dBf.
: 0.3 % (1 kHz)
: 60 dB
: 20 Hz – 15 kHz (± 3 dB)
: 42 dB (at 1 kHz)
: 75 dB
: 531 kHz - 1,602 kHz
: 27 dB/µV
: 65 dB
: 2 channels
: 16-bit liner
: 5 Hz - 20 kHz
: 90 dB (IHF, A)
: Below measurable limits
: 4-track, 2-program stereo
: 4.76 cm/sec
: 100 sec (C-60)
: 100 sec (C-60)
: 0.07 % (WRMS)
: Dolby B NR OFF 56 dB (IHF, A)
Dolby B NR ON 66 dB (IHF, A)
: 30 to 18,000 Hz (normal tape)
30 to 20,000 Hz (metal tape)
CQ-VX2200W
E
N
G
L
I
S
H
36 1
45