Table of Contents
Advertisement
Getting to Know Your Canyon
18
Shift from 4LO to 2HI or 4HI
• Stop the vehicle or drive at 3 mph
(5 km/h) or slower, with the transmis-
sion in Neutral (automatic transmis-
sion) or the clutch pedal depressed
(manual transmission). The preferred
method for shifting out of 4LO is to
have the vehicle moving at just under
3 mph (5 km/h).
• Press and release the 2HI or 4HI
button and wait for the 2HI or 4HI
indicator light to stop flashing and
remain illuminated before shifting the
transmission into gear or releasing
the clutch pedal.
Shift the transfer case into or out of
Neutral
Note: Shifting the transfer case to
Neutral can cause your vehicle to roll
even if the transmission is in Park (P) or
in gear. You or someone else could be
seriously injured. Be sure to set the
parking brake before placing the trans-
fer case in Neutral.
Shifting into Neutral
• Set the parking brake.
• Turn the ignition to Run but leave the
engine off.
• Press the regular brake pedal and
shift the transmission in Neutral (N),
or depress the clutch for vehicles with
a manual transmission.
• Shift the transfer case to two-wheel
high.
• Press and hold the two-wheel high
and four-wheel low buttons at the
same time for 10 seconds. The
Neutral (N) light will come on when
the transfer case shift to Neutral (N)
is complete.
• Start the engine.
• Press and hold the regular brake
pedal and shift the transmission to
Reverse (R) for one second; then
shift the transmission to Drive (D) for
one second, or First (1) for vehicles
with manual transmissions and let out
the clutch, to ensure the transfer case
is in Neutral. If not, repeat this proce-
dure starting at third step.
• Turn the engine off.
• Place the transmission shift lever in
Park (P), or First (1) for vehicles
equipped with a manual transmission.
• Turn the ignition to LOCK.
• Release the parking brake prior to
towing.
Shifting out of Neutral
• Set the parking brake and press and
hold the regular brake pedal.
• Shift the transmission to Neutral (N),
or press the clutch pedal for vehicles
with a manual transmission, and turn
the ignition to Run with the engine off.
• Press the button for the desired
transfer case shift position (2HI,
4HI, or 4LO).
• After the transfer case has shifted
out of Neutral, the indicator light will
go out.
• Release the parking brake.
• You may start the engine and shift
the transmission to the desired
position.
See Section 2 of your Owner Manual.
Hide quick links:
Advertisement
Table of Contents
