Appendix #2 - Connection To A Monitor & Standard Vcr - Lorex DXR4280UQ-A Instruction Manual

APPENDIX #2 – CONNECTION TO A MONITOR &
STANDARD VCR/SLAVE MONITOR
VIDEO VIDEO VIDEO
MONITOR MONITOR
Connection to a monitor for viewing
You can connect your DVR to a monitor for viewing purposes and for On Screen display set-up. Connect an
RCA audio/video cable from your DVR marked "Monitor Audio/Video output" to the audio/video input on the
monitor
Connection to a standard VCR
You may wish to record from the DVR to a VHS cassette in order to back up video and make it viewable for
other parties.
To record the video signal from your DVR connect an RCA audio/video cable from the Slave Audio/Video
output RCA jacks to the Audio/Video inputs on your VCR.
Connection to a Slave Monitor
To duplicate the signal from the master monitor to the slave monitor connect an RCA audio/video cable from
the Slave Audio/Video output on the DVR to the Audio/Video input on your slave monitor.
Note: The maximum distance using RCA cable should not exceed 20 meters
MONITOR OUT MONITOR OUT MONITOR OUT SLAVE OUT SLAVE OUT SLAVE OUT
AUDIO AUDIO AUDIO VIDEO VIDEO VIDEO AUDIO AUDIO AUDIO
Note: If you are using a standard VCR you
must select an A/V or AUX channel on your
VCR for recording to take place
VCR VCR
/ SLAVE MONITOR
-24-