Radio - Panasonic C9701U Operating Instructions Manual

Sound Control
You can make a fine adjustment of SQ and Position.
1
Set the SQ mode to on.
2
Hold down [CS] (SQ) for 2 sec. or more
to display the audio menu display.
3
Press [ } ] or [ { ] to select a function to
be adjusted.
4
Press [BAND]
(SET) to adjust.
5
Adjust the setting value.
]
[}][{][]][[ : Select
[BAND] (SET): Confirm
6
Press [DISP] to confirm the adjustment.
20
CQ-C9901U/C9801U/C9701U
SQ PRESET SELECT
Select your favorite type from 6 kinds of SQ Presets.
Note: You can also select the SQ preset number by
CS CS
SRC pressing [1] to [6] on the remote control.
SQ ADJUSTMENT (SQ9)
You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).
[ ] ][ [ ]: Frequency band
selection
qw:
Frequency selection
[ } ][ { ]: Level up/down
Note: If you hold down [BAND] for 2 sec. or more, the
presetting that is called up can be turned into the default.
SQ PRESET MEMORY
The current value is assigned to one of SQ preset 2 to 6.
1
Select a preset number by pressing
or .
[{], []] [[]
2
Hold down for 2 sec. or more.
[BAND]
Note: You can also select the SQ preset number by
pressing [2] to [6] on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.
POSITION
You can make the optimal sound field in accordance with
your seat.

Radio

A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum
reception.
1
Press [SRC] (Source) to select the
radio mode.
2
Press [BAND] to select a band.
Notes:
For tuning in on only stations whose receiving condi-
¡
tions are good in the station search, set LOCAL to ON.
(a page 23)
¡ For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON.
[}],
Preset Number
Band
Lights while receiving an FM stereo signal.
("STEREO": CQ-C9801U, CQ-C9701U)
Lights when MONO is activated.
( a page 23)
SRC CS
SRC
3
Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset):
[}] (P·SET: Preset):
Note:
(a page 23)
Direct Access can be executed with [1] to [6]
¡
buttons on remote control.
¡ Stations in FM 1 to 3 are sequentially selectable
without changing bands when "ALL BAND" is
selected in "AUTO PRESET".
CQ-C9901U/C9801U/C9701U
Lower preset number
Higher preset number
Frequency
Indicates the intensity of
the radio wave.
Lights when LOCAL is
( page 23)
activated. a
21