Horizon Fitness E51 Service Manual page 63

Replacing the Elliptical Pedal Arm
Tools: Phillips screwdriver, 5mm Allen wrench, 17mm wrench.
1. Remove the handlebar connecting arm (AH1) from the lower
handlebar by removing the connecting bolt (H16).
2. Remove the handlebar connecting arm (AH1) from the pedal arm by
removing the three attachment bolts (H11) and bracket (H10) with a
5mm Allen wrench.
3. Remove the nut (E21) attaching pedal arm to the pivot tube (AE2)
using 17mm wrench. Lift pedal arm off of crank arm.
4. Attach new pedal arm onto crank arm. Replace nut attaching pedal
arm to crank arm and secure nut with a 17mm wrench.
5. Attach the connecting arm to the pedal arm and lower handlebar.
6. Test ride elliptical to make sure it is working correctly.
63
Pedal Arm (Pivoting)