7 | CAN Configuration
7.2.5
7.2.6
62 / 78
Conversion to physical values
a)
b)
c)
d)
a) Enter factor (gain) for conversion to physical value.
b) Enter offset for conversion to physical value.
c) Select type of physical value.
d) Select unit of physical value.
e) Enter minimum physical limit of the channel. (for manual setup)
f) Enter maximum physical limit of the channel. (for manual setup)
g) Check the box to automatically adjust the limits of the channel.
Online view of CAN channels in vehicle
1. Double‐click on 'Sheet 1' in Project Tree. Measurement Sheet 1 is displayed
in Main Area.
2. Click on 'Measurement elements' in the Toolbox.
3. Drag the desired Measurement element (e.g. Numeric Indicator) and drop it
on the Measurement Sheet.
4. Click on folder 'CAN Input' of desired CAN bus to display available channels.
5. Drag desired Measurement channel and drop it on the Measurement ele‐
ment.
ECU MS 6
Drag + Drop
Bosch Motorsport
e)
f)
g)