Makita AN250HC Technical Information page 13

R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-8. Magazine, Magazine cap
DISASSEMBLING
Disassemble Magazine section as illustrated in Fig. 27.
Fig. 27
Remove M5x20 and M5x30 Hex
socket head bolts.
Magazine section can be separated
from Housing set.
M5x30 Hex socket
head bolt
ASSEMBLING
Take the disassembling step in reverse.
[4]-9. Door
DISASSEMBLING
(1) Remove Pin 5 and Urethane ring 3. Separate Door from Driver guide as illustrated in Fig. 22.
(2) Disassemble Door section as illustrated in Fig. 28.
Fig. 28
Hold this portion of Lock pin
with Vise.
Door
ASSEMBLING
Take the disassembling step in reverse.
Remove Urethane ring 3
with slotted screwdriver.
Pull off Pin 4 with pliers.
Urethane ring 3
M5x20 Hex socket
head bolt
Remove M4x10 Hex socket
head bolt with Hex wrench 3.
Vise
Pin 4
Magazine
Lock pin, Compression spring 6 and
Lock lever can be removed from Door.
M4x10 Hex
socket head bolt
Lock lever
Door
Lock pin
P 13/ 14
Magazine cap complete can
be separated from Magazine
as illustrated below.
Magazine cap complete
M4x10 Hex socket
head bolt
Compression
Spring 6