Panasonic DIGITAL Palmcorder PV-GS29 Operating Instructions Manual page 69

, If you install the USB Driver after the USB Cable is
connected_ or if you do not follow these Operating
lnstructions_ the Camcorder will not be recognized
correctly, tn this case, delete the USB Driver from
[Device Manager] as described betow_ uninstall the
USB Driver_ and re-install it.
• With the Camcorder and personal computer
connected via a USB Cable, open the [Device
Manager]. Right-click [!DVC] O in [Ports] or
[Other devices]_ and select [Uninstalt].
([!DVC] O will differ depending on the OS
or operating environment of your personal
computer.)
(For Windows)
i
!
ii i_i!ii!!i i !!'
T, ............... ,:
SD Memory Card (Optiona!)
The SD Memory Card is an external Memory Card
that is available in larger capacities. It has a write
protect switch to prevent data writing and card
formatting, as well as a copyright protection function.
, SD Logo is a trademark.
, All other company and product names in the
operating instructionsare trademarks or registered
trademarks of their respective corporations.
Files recorded on an SD Memory Card
it may not be possible to play back the files on
this Camcorder recorded on and created by other
equipment or vice versa. For this reason, check the
compatibility of the equipment in advance.
Data files recorded on an "SD Memory Card" by
this Camcorder conform with DCF (Design rule for
Camera File system) established by JEITA (Japan
Electronics and Information Technology Industries
Association).
. If you attempt to play back files recorded with this
Camcorder on other equipment or to play back files
recorded with other equipment on this Camcorder,
you may not be able to play them back, Please
check the compatibility with the other equipment in
advance.
• When a Card with data recorded on it is inserted
into a personal computer_ folders will be displayed
as shown in the following figure.
[100CDPFP]:
The images (IMGA0001 .JPG_ etc.) in this folder are
recorded in the JPEG format,
[MISC]:
Files in which DPOF Data has been set to the image
are in this folder.
• [DCIM], etc. are necessary items in the folder
structure, They have nothing to do with actual
operation.
• In the Card Mode, the Camcorder automatically
saves file numbers (IMGA000f .JPG, etc.) along
with the images. The file numbers are recorded
with each image as consecutive numbers,
• When using software without an indication functiom
indication data, such as date, are not displayed.
Depending on the software in use_ the date and the
time may not be displayed correctly,
• The memory capacity indicated on the SD Card
label corresponds to the total card capacity, Some
of this capacity is used to protect and manage the
copyright data_ and not all capacity is available as
a conventional memory for a Camcorder, Personal
Computer or others,
-g
O
69