Panasonic DIGITAL Palmcorder PV-GS29 Operating Instructions Manual page 57

. Despite having the Operating environment
indicated_ itmay n ot bepossible touse the program
with some types ofpersona( computers.
. When you connect toanUSB 2 .0 interface board_
use acertified board with the USB 2 .0 (HI-SPEED
USB) logo.
[] ForWindows
OS:
O
Function:
IBM PC/AT compatible personal computer with
pre-installed:
Microsoft Windows XP Professional/Home Edition
Microsoft Windows 2000
, The USB equipment operates with the driver
installed standard on your OS.
Function:
. This )s the Operating environment for the USB
Driver which can be installed from the supplied
CD-ROM (PV-GS59) or the Web Site (PV-GS39).
IBM PC/AT compatible personal computer with
pre-)nstalled:
Microsoft Windows XP Professional/Home Edition
SP1 (PV-GS59) / SP2 (PV-GS39) or later
Microsoft Windows 2000 SP4 or later
(PV-GS39 Only)
. For Windows 2000 users:
P)ease download and install the USB Driver from
the Web Site.
. For Windows XP SP2 users:
The USB equipment operates with the driver
installed standard on your OS.
(PV-GS59 Only)
. You'll need to install the USB Driver from the
supplied CD-ROM.
CPU:
(ntel Pentium I1300 MHz or higher
(inc(uding compat)ble CPU)
RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more - A Type
[] For Macintosh
OS:
Mac OS X v 10.1 -Xv 10.4
(Function O Only)
CPU:
Power PC G3 (400 MHz or h)gher), G4, G5
RAM:
64 MB or more
. The USB equipment operates with the driver
installed standard on your OS.
PV=GS59 Only
Install the USB Driver first before connecting the
Camcorder to your PC with the USB Cable.
• When DirectX9.0b is installed, applications
supported by previous versions of DirectX may not
run. In this case_ consult the manufacturers of the
disabled applications.
• If DirectX 9.0b is not already installed, it must be
installed on your PC.
1 Turn on the personal computer and start
up Windows.
3
4
[PV-GS59: Supplied]
Insert the CD-ROM into the personal
computer's CD-ROM drive.
. Quit all applicat)ons.
, The [Setup Menu] Screen appears.
Click the [US8 Driver].
• The set up program starts running.
For Windows XP users:
Depending on your system environment,
installation of "DirectXg.0b" may be
required. Click [Yes] and continue with
installation.
, After "DirectX9.Ob" is installed, the computer
will restart.
, Do not remove the CD-ROM.
5 Finish installation by following the
on-screen instructions.
, Click [Next] and proceed with installation.
, After completing the installation, click [Finish].
Click [Finish] if the [InstallShiled Wizard]
dialog appears.
, Do not remove the CD-ROM.
-g
O
57