Table of Contents
Advertisement
LSQT1025(ENG).book 88 ページ ２００６年２月４日 土曜日 午後６時１０分
Editing scenes
Deleting multiple scenes from the thumbnail display
¬ Rotate the mode dial to select
1 Press the MENU button, then select [ DELETE]
# [ SELECT] or [
≥ When [ALL] is selected, the following scenes will be deleted.
Proceed to step 4.
– When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the
disc
– When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date
2
(Only when [SELECT] is selected in step 1)
Select the scene to be deleted, then press the
joystick.
The selected scene is encircled by a yellow frame.
≥ When the joystick is pressed again, the selected scene will be
cancelled.
≥ Up to 8 scenes displayed on a page can be set in succession.
3
(Only when [SELECT] is selected in step 1)
Press the
4 When the confirmation message appears, select [YES], then press the
joystick.
(Only when [SELECT] is selected in step 1)
To continue deleting other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
≥ To delete an unwanted part of a scene, divide the
scene first, and then delete the unnecessary part.
(l 89)
≥ In case of [ALL], the deletion may take time if there
are many scenes on the disc.
≥ Do not turn off this unit while deleting.
88
LSQT1025
.
ALL] and press the joystick.
button.
≥ When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥ It may not be possible to delete scenes that have
been divided. Combine the divided scenes, and
then delete them.
Advertisement
Table of Contents
