Table of Contents
Advertisement
LSQT1025(ENG).book 13 ページ ２００６年２月４日 土曜日 午後６時１０分
Lens hood
In order to remove the lens hood, rotate it counter-clockwise A. In order to fit it, place into slot B,
and then rotate it clockwise C.
≥ (VDR-D300 only) The lens hood has a built-in lens cover.
≥ Fit the MC protector or the ND filter of the Filter Kit
(VW-LF37WE; optional) in front of the lens hood. Do
not fit the other accessories on the hood. (Except
for the lens cap)
(Refer to the operating instructions for the Filter Kit.)
≥ When fitting the tele conversion lens
(VW-LT3714ME; optional) or the wide conversion
lens (VW-LW3707M3E; optional), first remove the
lens hood.
(Refer to the operating instructions for the tele
conversion lens or the wide conversion lens.)
B
A
≥ When 2 lens accessories, such as the ND filter and
tele conversion lens, are fitted and the W/T lever is
pressed toward the W side, the 4 corners of an
image will be darkened. (Vignetting)
Parts identification and handling
C
13
LSQT1025
Advertisement
Table of Contents
